Helipad Instructions


Lift Attachment

Lets start with the lift by gathering these parts

Glue the front plates in to the slots in the sides as shown

Glue the back plates in place as shown

Glue the top and bottom plates in with the details facing out on both

Helipad Base

Find the Helipad plate and hinge detail inserts

The hinge details are small and look like this

From the back side, glue the hinges in place as shown

It should look like this from the top once in place

Gather up the 4 pieces of the under-structure

Begin gluing the structure together as shown

Once complete, the substructure should look like this

The substructure should slot up through the bottom of the helipad surface plate. Glue this in place

Glue the Brace feet in place slotted into the substructure as shown.  One of the brace feet has pegs on the bottom to slot into the rail hols on the roofs of the buildings to help keep it steady during game-play. 

You're all done!

Prime with Rust-o-leum Profesional Enamel flat black and paint as normal with hobby paints.


© 2012 - 2017 Death Ray Designs LLC.  All Rights Reserved.