Gather these parts
Assemble 2 forward braces
Assemble 1 rear brace
Glue and slot the 2 forward braces into the slots on the ends of the wall
Glue and slot the rear brace into the center
Gather 4 reinforcement ribs
Glue the ribs into the wall by sliding the hook down on the notches at the top of the wall and rotating it down to fit the tab into the hole below the notch.
You can glue the optional acrylic rods into the holes at the top of the ribs. We recommend gluing them with superglue then scoring the rod with a knife and snapping the excess off.
You are finished. Prime with Rust-o-leum Profesional Enamel flat black and paint as normal with hobby paints.
© 2022 Death Ray Designs LLC. All Rights Reserved.